MCFION Smart · Signature Systems
Native smart-home integration with the deepest dimming precision we offer.
Matter-native control built into every driver, panel and sensor — Apple Home, Google Home and Amazon Alexa on one companion app. DALI-2 certified, Triac phase-cut, 0-10V and DMX512 — four dimming protocols engineered into one driver family, commissioned with a tap of NFC, running on a SIG Mesh–certified network that keeps working without a gateway.
Smart control technology
MCFION specifies, integrates and warrants the complete system — built on LTECH's certified smart-control technology.
Native Apple Home, Google Home & Amazon Alexa
NFC tap-to-configure commissioning
SIG Mesh–certified, self-healing network
Built for signature residences, flagship retail & design-led hospitality
Drivers, network and ecosystem — one native system, engineered across every protocol.
Every driver and panel self-organizes into a SIG Mesh–certified Bluetooth network, verified to the Bluetooth SIG's own interoperability standard. Each powered node relays the signal, so coverage — and reliability — grows with every fixture added to the project.
01
DALI-2, Triac phase-cut, 0-10V and DMX512 drivers across strip, downlight, line-light and magnetic-track circuits — every protocol engineered into one certified driver family, and every circuit an addressable network node.
02
SIG Mesh–certified Bluetooth, self-organizing and self-healing, with a native Matter bridge into Apple Home, Google Home and Amazon Alexa. Scenes and schedules run on the network itself, so the system keeps working even with no internet connection.
03
Multi-function wall panels, an NFC tap to commission a room, or the companion app synced to Apple Home, Google Home and Amazon Alexa — local and remote control from whichever interface the room needs.
The details that matter once a design intent has to survive a real electrical panel.
Apple Home, Google Home and Amazon Alexa see every fixture natively — no bridge translation, no third-party skill to configure.
Digital T-PWM dimming resolves fine enough to disappear at the low end — flicker-free output verified against IEEE-1789 limits.
Every Bluetooth product is certified to the official Bluetooth SIG Mesh standard, not a private mesh — self-healing as the project grows.
DALI-2, Triac phase-cut, 0-10V and DMX512 engineered into the same certified driver line — one spec sheet, any dimmer already on site.
Hold a phone to the driver to read or write dimming parameters and batch-program a run of fixtures — no power-up required.
Red Dot, iF and Good Design Award–recognized industrial design, engineered for signature residences and flagship spaces.
Standard 86-type panels in four finishes, a battery panel that needs no wiring at all, and NFC commissioning for every driver on site.
WIRED
Linear dimming and color-temperature control plus up to eight scene modes. Rose gold, graphite grey, champagne and pearl white finishes, with customizable silkscreen for branded projects. 86 × 86 × 33mm · AC 100–240V.
WIRELESS
Battery-powered, roughly 20-month standby and 15m+ range. Dimming, color and scene control from a bedside table, an entryway, or anywhere a switch box doesn't exist.
NFC
Tap a phone to the driver to read or write dimming parameters, and batch-program a full run of fixtures before they're even powered on.
APP
A companion app that also bridges into Apple Home, Google Home and Amazon Alexa — pair a room in seconds, sync scenes across ecosystems, and manage it from anywhere on the same network.
A complete driver family spanning DALI-2, Triac phase-cut, 0-10V and DMX512 — one certified line, engineered for every dimmer already on site.
DALI-2 DT6/DT8 dimming to the international DALI bus standard — addressable, scene-programmable control built for architectural and hospitality lighting.
Leading- and trailing-edge Triac (ELV) dimming for line lights and downlights, power factor above 0.9, with T-PWM dimming down to 0.0001%, flicker-free.
Hot-pluggable and polarity-free, with over-current and over-voltage protection, in long and short track-mount formats.
A 2-channel 0-10V bridge for existing dimmable and color-temperature drivers, plus DMX512 control for architectural and stage-grade lighting scenes.
Luxury villa, design-led hospitality, flagship retail and executive office — the same native system, tuned to each.
DALI-2 and Triac drivers · Matter-native panel and companion app
In a signature residence, light should answer to Apple Home routines and Siri, not a separate hub. Ultra-deep dimming keeps evening scenes below the point where a change is even visible.
DALI-2 panels and NFC-configured drivers · branded silkscreen finishes
A flagship or design-led property needs lighting that reads as bespoke, not retrofitted. NFC commissioning configures every fixture before it reaches the wall, and branded panel finishes match the property's own design language.
DMX512 and 0-10V drivers · magnetic-track and RGBW lighting
Flagship and showcase stores change their lighting as often as their merchandising. DMX512 control gives the display window stage-grade programmability, on the same network across every store in the chain.
DALI-2 and 0-10V drivers · Matter-native scheduling
A headquarters or showpiece office is judged on how quietly its systems work. DALI-2 zoning and Matter-native scheduling keep the building on-brand and on-schedule without facilities staff touching a switch.
The same SIG Mesh–certified network grows with the project — an optional Matter bridge, sensors and curtain control included.
An optional bridge that brings the SIG Mesh–certified network natively into Apple Home, Google Home and Amazon Alexa — the network keeps working locally with or without it.
40W drive, 1.2N·m torque and roughly 8–9kg pull — app, panel and remote control in one scene with the lighting.
120° infrared light sensing at 3–6m range, plus true-occupancy presence detection for corridors and utility zones.
Product photo — replace
Battery-powered with automatic infrared sensing, rated beyond 20,000 hours — a quiet addition to any scene.
Engineered on a SIG Mesh–certified Bluetooth network with a native Matter bridge — from a single driver to a fully specified signature project.
| Wireless protocol | SIG Mesh–certified Bluetooth network, self-organizing and self-healing, with a native Matter bridge into Apple Home, Google Home and Amazon Alexa |
| Dimming performance | T-PWM ultra-deep dimming to 0.0001%, flicker-free · full CCT tuning · RGBW color with gradients and jump effects |
| Signature features | Matter-native control · NFC tap-to-configure · SIG Mesh certification · DALI-2, Triac, 0-10V and DMX512 in one driver family |
| Driver family | DALI-2 DT6/DT8 constant-current · Triac phase-cut (CE, PF above 0.9) · 48V magnetic-track · 0-10V 2-channel bridge · DMX512 control — one certified family across every protocol on site |
| Panels | 8/6/4-key multi-function (86-type, 4 finishes, custom silkscreen) · battery stick-anywhere panel · NFC configuration point |
| Expansion | Optional Matter/Apple Home bridge · Bluetooth curtain motor · infrared / presence sensors · infrared night light |
| App platform | Companion app bridged to Apple Home, Google Home and Amazon Alexa — scenes, timers, zone sharing, account handover, OTA updates, cloud backup |
No. Drivers install in place of standard ones, battery panels stick anywhere, and the network itself is wireless — existing circuits and switch boxes stay as they are.
Not for local control — the SIG Mesh–certified network runs panels, sensors and scenes on its own, even with no internet connection. Add the optional Matter bridge when the project needs Apple Home, Google Home, Amazon Alexa, or remote access from outside the building.
Nothing changes locally. Scenes and schedules are stored on the network itself, which self-heals without any connection — panels and sensors keep working; only remote access and voice assistants need the internet back.
Natively. Every driver, panel and scene bridges into Matter, so it shows up inside Apple Home, Google Home and Amazon Alexa as a native accessory — no extra skill, plugin or separate app required for voice or automation.
Yes — panel finishes and silkscreen content are customizable, standard practice for signature residential and hospitality projects.
Every driver and panel carries a standard warranty, with project-level engineering support for large or phased rollouts.